Power Tools
http://www.trumpf-powertools.com/

General catalogue
TRUMPF_Gesamt_Katalog_EN.pdf

Cutting - Shears, Cutting - Nibblers, Cutting - Profile nibblers, Cutting - Panel Cutter, Fastening - Seam lockers, Fastening - Power fasteners, Beveling - Deburrers - Bevellers, TruTool Screw - Drill driver, Special machines,

Cutting - Slitting shears


TRUMPF TruTool slitting shears are an electric hand tool used for slitting of plate-shaped workpieces made of steel, aluminum, plastic, etc. Slitting straight or curved exterior and interior cutouts, slitting along scribed lines.


TruTool C 160



TruTool C 160 with chip breaker



TruTool C 250 with chip breaker

Technical data C 160 C 160 with chip breaker C 250 with chip breaker
Voltage 230 V 230 V 230 V
Frequency 50/60 Hz 50/60 Hz 50/60 Hz
Working speed 6 - 10 m/min 6 - 10 m/min 3 - 10 m/min
Rated input power 350 W 350 W 500 W
No-load speed 5800/min 5800/min 4000/min
Weight 1,4 kg 1,4 kg 2 kg
Start hole diameter
8 mm (Cr), 15 mm (straight cutter) 8 mm (Cr), 15 mm (straight cutter) 25 mm
Smallest radius with curved cuts 40 mm (curve cutter), 90 mm (straight cutter), 160 mm (Cr) 40 mm (curve cutter), 90 mm (straight cutter), 160 mm (Cr) -


Technical data C 160 C 160 with chip breaker C 250 with chip breaker
Max. sheet thickness Max. sheet thickness Max. sheet thickness
Steel 400 N/mm² Steel 600 N/mm² Aluminium 250 N/mm² Steel 400 N/mm² Steel 600 N/mm² Aluminium 250 N/mm² Steel 400 N/mm² Steel 600 N/mm² Aluminium 250 N/mm²
Straight cutter 1,6 mm 1,2 mm 2,0 mm 1,6 mm 1,2 mm 2,0 mm 2,5 mm 1,5 mm 3,0 mm
Curve cutter 1,0 mm 0,8 mm 1,2 mm 1,0 mm 0,8 mm 1,2 mm - - -


Cutting - Shears


Trumpf TruTool shears are an electric hand tool designed for cutting sheet preform made of steel, aluminium. TruTool shears are suitable for workers in metal industry, plumbers, electricians, when installing heating and air conditioning, installing and dismantling of elevators, container, etc..


TruTool S 130



TruTool S 160 E



TruTool S 160



TruTool S 250



TruTool S 350



TruTool S 450



TruTool S 114

Technical data S 130 S 160 E S 160 S 250 S 350 S 450 S 114
Voltage 230 V 230 V 230 V 230 V 230 V 230 V 230 V
Max. sheet thickness
Steel 400 N/mm²
Steel 600 N/mm²
Steel 800 N/mm²
Aluminium 250 N/mm²

1,3 mm
0,8 mm
-
2 mm

1,6 mm
1 mm
0,7 mm
2 mm

1,6 mm
1,2 mm
1 mm
2 mm

2,5 mm
2 mm
1,5 mm
3 mm

3,5 mm
3 mm
2 mm
4 mm

4,5 mm
3,5 mm
2,5 mm
5 mm

1,6 mm
1 mm
-
2 mm
Working speed 4 - 7 m/min 2 - 7 m/min 8 - 12 m/min 4 -7 m/min 4 - 6 m/min 4 - 6 m/min 4 - 6 m/min
Rated input power - 350 W 350 W 500 W 1400 W 1400 W 350 W
Non-load speed - - - - - - -
Weight 1,3 kg 1,9 kg 1,6 kg 2,2 kg 5,6 kg 6,2 kg 1,9 kg
Start hole diameter
27 mm 23 mm 27 mm 28 mm 50 mm 75 mm -
Smallest radius with curved cuts 15 mm 20 mm 15 mm 20 mm R 30 / L 16 mm R 35 / L 25 mm 60 mm






Top


Cutting - Nibblers


Whether you work with a sheet of 0.5 mm to 10 mm, Trumpf always has the right nibblers for you. Each of nibblers works without distortion steel, no emissions and sparks. Nibblers on offer are suitable for processing sheet metal, then when mounting or dismounting the tank, containers.


TruTool N 160 E



TruTool N 200



TruTool N 350



TruTool N 500



TruTool N 700



TruTool N 1000

Technical data N 160 E N 200 N 350 N 500 N 700 N 1000
Voltage 230 V 230 V 230 V 230 V 230 V 230 V
1./2. gear
Max. sheet thickness
Steel 400 N/mm²
Steel 600 N/mm²
Steel 800 N/mm²
Aluminium 250 N/mm²

1,6 mm
1 mm
0,7 mm
2 mm

2 mm
1,5 mm
1 mm
2,5 mm

3,5 mm
2,3 mm
1,8 mm
3,5 mm

5 mm
3,2 mm
2,5 mm
7 mm

7 mm
5 mm
3,5 mm
10 mm

10/8 mm
7/5 mm
5/4 mm
12/10 mm




Working speed 1,5 m/min 1,5 m/min 1,4 m/min 1,5 m/min 1,3 m/min 1/1,6 m/min
Rated input power 350 W 500 W 1400 W 1400 W 1600 W 2000 W
Non-load speed - - - - - -
Weight 1,7 kg 2,1 kg 3,7 kg 4 kg 8,3 kg 14,7 kg
Start hole diameter
21 mm 17 mm 30 mm 41 mm 50 mm 75 mm
Smallest radius with curved cuts 40 mm 4 mm 7 mm 90 mm 140 mm 300 mm






Top


Cutting - Profile nibblers


Trumpf has developed an ideal tool for workers in the metal industry, plumbers, and the roof structure. Profile nibblers always provide high quality edges with no corrosion or the formation of oxides. Whether you use steel or aluminium, cutting trapezoidal or corrugated profile and cutting holes, profile nibblers will do the job.


TruTool N 160 E with extension



TruTool PN 201



TruTool PN 200

Technical data N 160 E with extension PN 201 PN 200
Voltage 230 V 230 V 230 V
Max. sheet thickness
Steel 400 N/mm²
Steel 600 N/mm²
Steel 800 N/mm²
Aluminium 250 N/mm²

1,6 mm
1 mm
0,7 mm
2 mm

2 mm
1,5 mm
1 mm
3 mm

2 mm
1,5 mm
1 mm
3 mm
Working speed 1,5 m/min 2,2 m/min 2 m/min
Rated input power 1600 W 550 W 500 W
Non-load speed - - -
Weight 1,7 kg 2 kg 2,1 kg
Start hole diameter
21 mm 24 mm 24 mm
Smallest radius with curved cuts 40 mm 50 mm 50 mm





Top


Cutting - Panel Cutter


The new Panel Cutter TruTool 165 separates polyurethane and polyisocyanurate sandwich panels regardless of whether the panel surface is flat, trapezoidal or corrugated. the machine can handle diverse applications, ranging from crosscuts and right-angle cuts to interior cutouts and notches. Even cutouts on pre-mounted panels are easy work for the new panel cutter. With a 90 degree adjustable blade, you can easily and quickly produce right-angled cutouts. Another plus: as a result of its immersion mechanism, it's possible to start at any location on the panel without a starting drill hole.


TruTool TPC 165

Technical data TPC 165
Voltage 230 V
Max. panel thickness 165 mm
Working speed 4 m/min
Rated input power 1400 W
Cutting width 4 mm
Weight 9,6 kg





Top


Fastening - Seam lockers


Trumpf's tools for closing the seams are power tools that are used to close the Pittsburgh seam in the previous parts properly prepared, as in ventilation ducts, housings, tanks, etc.. Folded seams can be close to flat and curved contours.


TruTool F 300



TruTool F 300 with 1400 W



TruTool F 301



TruTool F 305



TruTool F 140



TruTool F 140 for fan blower



TruTool F 125

Technical data F 300 F 300 with 1400 W F 301 F 305 F 140 F 140 for fan blower F 125
Voltage 230 V 230 V 230 V 230 V 230 V 230 V 230 V
Max. sheet thickness
Steel 400 N/mm² (min.)
Steel 400 N/mm² (max.)
Steel 600 N/mm²

0,75 mm
1,25 mm
-

0,75 mm
1,25 mm
-

0,45 mm
1 mm
-

0,45 mm
0,75 mm
-

-
1,4 mm
0,6 mm

-
1,4 mm
0,6 mm

-
1,25 mm
-
Working speed 4 - 7 m/min 6,5-10,5 m/min 4 - 7 m/min 4 - 7 m/min 6 - 10 m/min 6 - 10 m/min 5 - 6 m/min
Rated input power 600 W 1400 W 500 W 500 W 500 W 500 W 500 W
Non-load speed - - - - - - -
Weight 5,4 kg 6,2 kg 5,2 kg 5,2 kg 4,2 kg 4,2 kg 2,8 kg
Smallest inner radius (preformed)
150 mm 150 mm 150 mm - 300 mm 300 mm -
Smallest outer radius 300 mm 300 mm 300 mm - 500 mm 100 mm -







Top


Fastening - Power fastener


With the power fastener you can join coated or uncoated workpieces. There is no limit to the variety of materials. There is no need for pre- or post-processing. And there are no costs for fasteners like screws or rivets. You can work quickly, since two joins per second are created. In a cold forming process the power fastener cuts and forms the connecting element out of the working material. In this process, the upper sheet is tightly and positively connected to the lower sheet.


TruTool TF 350

Technical data TF 350 TF 350 with battery
Voltage 230 V -
Min. sheet thickness 0,8 mm 0,8 mm
Max. sheet thickness
Steel 400 N/mm²
Steel 600 N/mm²
Steel 800 N/mm²
Aluminium 250 N/mm²

3,5 mm
2,5 mm
-
4 mm

3,5 mm
2,5 mm
-
4 mm
Working speed 1,5 m/min 2,2 m/min
Rated input power 1400 W -
Weight 8,3 kg 8,7 kg




Top


Bevelling - Deburrers - Bevellers


TRUMPF TruTool TKA 500 lip trimmer is an electrical powered hand-held device designed for the following applications:


TruTool TKA 500

Technical data TKA 500
Bevel angle 45 °
Max. bevel height
Steel 400 N/mm²
Steel 600 N/mm²
Steel 800 N/mm²
Aluminium 250 N/mm²

3,5 mm
1,8 mm
1 mm
6,5 mm
Max. bevel lenght
Steel 400 N/mm²
Steel 600 N/mm²
Steel 800 N/mm²
Aluminium 250 N/mm²

5 mm
2,5 mm
1,5 mm
7,5 mm
Working speed 3 - 4 m/min
Rated input power 1400 W
Smallest inner radius 12 mm
Weight 3,5 kg





TruTool TKF 700



TruTool TKF 1100



TruTool TKF 1101



TruTool TKF 1500



TruTool TKF 1500 with 2 speed



TruTool TKF 1500 with auto. forward feed



TruTool TKF 1500 with auto. forward feed and 2 speed



TruTool TKF 2000



TruTool TKF 2000 with auto. forward feed

Technical data TKF 700 TKF 1100 TKF 1101 TKF 1500 TKF 1500 2 gear 1/2 gear TKF 1500 auto. TKF 1500 auto.2 gear TKF 2000 TKF 2000 auto.
Voltage 230 V 230 V 230 V 230 V 230 V 230 V 230 V 230 V 230 V
Bevel angle / with spec.stripper 45 ° 45 ° 45 ° 20 ° - 45 °/ 20 ° - 55 ° 20 ° - 45 °/ 20 ° - 55 ° 20 ° - 55 ° 20 ° - 55 ° 20 ° - 55 ° 20 ° - 55 °
Max. bevel height
Steel 400 N/mm²
Steel 500 N/mm²
Steel 600 N/mm²
Steel 800 N/mm²
Aluminium 250 N/mm²

4,9 mm
-
4 mm
2,8 mm
-

7,8 mm
-
6,4 mm
4,2
-

7,8 mm
-
6,4 mm
4,2 mm
-

-
-
-
-
-

-
-
-
-
-

-
-
-
-
-

-
-
-
-
-

-
-
-
-
-

-
-
-
-
-
Max. bevel lenght
Steel 400 N/mm²
Steel 500 N/mm²
Steel 600 N/mm²
Steel 800 N/mm²
Aluminium 250 N/mm²

7 mm
-
5,7 mm
4 mm
-

11 mm
-
9 mm
6 mm
-

11 mm
-
9 mm
6 mm
-

15 mm
-
9 mm
6 mm
-

15/15 mm
-
11/9 mm
9/6 mm
-

15 mm
-
9 mm
-
-

15/15 mm
-
11/9 mm
-
-

20 mm
16 mm
-
-
20 mm

20 mm
16 mm
-
-
20 mm
Working speed 1,5 m/min 2 m/min 2 m/min 2 m/min 1,25 / 2 m/min 2 m/min 1,25 / 2 m/min 1,4 m/min 1,4 m/min
Rated input power 1400 W 1550 W 1680 W 2000 W 2000 W 2000 W 2000 W 2500 W 2500 W
Max. sheet thickness 1 - 20 mm 3 - 25 mm 3 - 25 mm 4 - 160 mm 4 - 160 mm 6 - 40 mm 6 - 40 mm 10 - 50 mm 10 - 50 mm
Weight 5,4 kg 9,9 kg 9,9 kg 16,5 kg 19,5 kg 24 kg 27 kg 32 kg 46 kg
Start hole diameter
- - - - - - - - -
Smallest inner radius 40 mm 40 mm 40 mm 55 mm 55 mm - - 125 mm 500 mm









Top


TruTool Screw - Drill driver


Equipped with two gear ratios, the high-quality drill driver can achieve 15 or 30 newton meters in both the clockwise and counterclockwise directions. Maximum idle speed is 1,450 revolutions per minute. The drill driver is distinguished above all by its ergonomically correct design and superb operating convenience. TruTool DD 1010 - including the rechargeable battery - weighs only 1,1 kg and can be used for start hole drillings in steel and, in just the same way, to drive screws and drill holes in a variety of other materials.


TruTool DD 1010

Technical data TruTool DD 1010
Gears 2
Max. drill performance (steel) 8 mm
Max. drill performance (wood) 20 mm
Max. torque (soft / hard) 15 Nm/30 Nm
Voltage / capacity 10,8 V
Weight 1,1 kg with 2Ah battery, 1,3 kg with 4Ah battery





Top


Special machines


With the TruTool TSC you can clean the slats of your flatbed laser machine quickly and reliably. Two pairs of rollers break down the slag, adjusting automatically to a great variety of slag thickness.


TruTool TSC 100



Technical data TSC 100
Max. slag thickness 25 mm
Working speed 4 - 8 m/min
Rated input power 1400 W
Weight 18 kg




Top